PUBLICATIONS

2024

  1. Jong Eun Kim, Hong Sun Ryou, Young Man Lee and Seong Hyuk Lee, Gas Venting Behavior and Early Detection Performance in Energy Storage System Battery Modules Under Various Thermal Runaway Scenarios, Case Studies in Thermal Engineering, submitted.
  2. Jinghao Jin, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Vapor Shielding Effect on Particle Deposition Patterns During the Evaporation of Multiple Droplets, Applied Thermal Engineering, submitted.
  3. Jinghao Jin, Hyung Ju Lee, Longnan Li, and Seong Hyuk Lee, Vapor Shielding Effect and Selective Evaporation Analysis of Paired Unary and Binary Mixture Droplets Using Surface Plasmon Resonance Imaging and CFD Predictions, Journal of Mechanical Science and Technology, under review.
  4. B A H M Bamunuarachchi, Jinghao Jin, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Enhanced Thin-Film Deposition Uniformity During Droplet Evaporation: Effects of Graphene Particle Size and Concentration, International Communications in Heat and Mass Transfer, Vol.159, pp. 108292 (IJ146, IF: 6.4).
  5. Xian You Zhu, Jung Hee Lee, Kyong-Hwan Kim, Chang-Hyuck Lim, and Seong Hyuk Lee, Coupled CFD modeling and thermal analysis of multi-layered insulation structures in liquid hydrogen storage tanks for various vapor-cooled shields, Case Studies in Thermal Engineering, Vol. 63, pp. 105317 (IJ145, IF: 6.4)
  6. Hongjian Wang, Hyung Ju Lee, Jinghao Jin, Chang Kyoung Choi, Longnan Li, Wei Li, and Seong Hyuk Lee, Design optimization for a high-performance surface plasmon resonance device for effective measurement of evaporating thin film thickness, Journal of Mechanical Science and Technology, Vol. 38, pp. 1-10 (IJ144, IF: 1.5)
  7. Sehyeon Cho, Dayoung Kong, Gyohoon Geum, Seungjae Lee, Junrae Park, Seong Hyuk Lee, Jungho Lee, Hyoungsoon Lee, Explicitly defined empirical constant for phase-change simulation in atwo-phase closed thermosyphon, International Communications in Heat and Mass Transfer, Vol. 158, pp. 107932 (IJ143, IF: 6.4).
  8. Won Yeong Hwang, Hyung Ju Lee, Jinghao Jin, Chang Kyoung Choi, and Seong Hyuk Lee, Enhanced Insights into Paired Droplet Evaporation Dynamics on Heated Substrates: Unveiling the Role of Convection and Diffusion, International Communications in Heat and Mass Transfer, Vol. 157, pp. 107740 (IJ142, IF: 6.4)
  9. Xian You Zhu, Jung Hee Lee, Kyong-Hwan Kim, and Seong Hyuk Lee, Computational design of vapor-cooled shield structure for liquid hydrogen storage tank, Journal of Mechanical Science and Technology, Vol. 38, pp. 1575 (IJ141, IF: 1.5)
  10. Gyohoon Geum, Sukkyung Kang, Sehyeon Cho, Daeyoung Kong, Seungjae Lee, JinHyeuk Seo, Dong Hwang Shin, Seong Hyuk Lee, and Jungho Lee, and Hyoungsoon Lee, Thermal performance analysis of heat pipe heat exchanger for effective waste heat recovery, International Communications in Heat and Mass Transfer, Vol. 151, pp. 107223 (IJ140, IF: 6.4)
  11. Won Yeong Hwang, Hyung Ju Lee, Jinghao Jin, Hong Sun Ryou, Chang Kyoung Choi, Sung Ho Hong, and Seong Hyuk Lee, Computational design of a smoke detector with high sensitivity considering three-dimensional flow characteristics, Case Studies in Thermal Engineering, Vol.53, pp. 103896 (IJ139, IF: 6.4)

2023

  1. Sehyeon Cho, Daeyoung Kong, Gyohoon Geum, Sukkyung Kang, Jin Hyeuk Seo, Jun Soo Kim, Seong Hyuk Lee, Jungho Lee and Hyoungsoon Lee, Experimental and computational investigation of thermal performance and fluid flow in two-phase closed thermosyphon, Applied Thermal Engineering, Vol. 235, pp. 121327 (IJ138, IF: 1.34)
  2. Seung Ho Yeom, Kyeong Ho Jang, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Selective evaporation and contact line motions of evaporating ethylene glycol–water mixture droplets, Applied Thermal Engineering, Vol. 232, pp. 121040 (IJ137, IF: 1.34)
  3. Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Surface plasmon resonance imaging for analyzing the local variation of evaporation flux of multiple binary mixture droplets, International Communications in Heat and Mass Transfer, Vol. 146, pp. 106906 (IJ136, IF: 6.4)
  4. Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Vapor-shielding effect and evaporation characteristics of multiple droplets, International Communications in Heat and Mass Transfer, Vol. 144, pp. 106789 (IJ135, IF: 6.4)
  5. Kyeong Ho Jang, Seung Ho Yeom, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Volatility effect on internal flow and contact line behavior during evaporation of binary mixture droplets, International Journal of Heat and Mass Transfer, Vol. 207, pp. 124009 (IJ134, IF: 5.0)
  6. Taeyoung Kim, Changhwan Song, Sung Il Park, Seong Hyuk Lee, Bong Jae Lee, and Jungwan Cho, Modeling and analyzing near-junction thermal transport in high-heat-flux GaN devices heterogeneously integrated with diamond, International Communications in Heat and Mass Transfer, Vol. 143, pp. 106682 (IJ133, IF: 6.4)
  7. Jinghao Jin, Seung Ho Yeom, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, The effect of nozzle spacing on the electric field and fiber size distribution in a multi-nozzle electrospinning system, Vol. 140, Journal of Applied Polymer Science, e53764 (IJ132, IF: 2.7)

2022

  1. Seung Ho Yeom, Kwangu Kang, Jin-Yeong Park, and Seong Hyuk Lee, Influence of electro-thermal probe tip shape on thin liquid layer evolution and penetration speed in glaciers, Journal of Mechanical Science and Technology, Vol. 37, pp. 527 (IJ131, IF: 1.5)
  2. Kuk Hyun Yun, Bong Jae Lee, and Seong Hyuk Lee, Modeling effective thermal conductivity enhanced by surface waves using the Boltzmann transport equation, Scientific Reports, Vol. 12, pp. 15477 (IJ130, IF: 3.8)
  3. Kyeong Ho Jang, Hong Seok Kim, and Seong Hyuk Lee, Numerical analysis of free-piston Stirling cooler systems for improving cooling performance, Case Studies in Thermal Engineering, Vol. 37, pp. 102272 (IJ129, IF: 6.4)
  4. Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Local heating effect on thermal Marangoni flow and heat transfer characteristics of an evaporating droplet, International Journal of Heat and Mass Transfer, Vol. 195, pp. 123206 (IJ128, IF: 5.0)
  5. Joo Hyun Moon, JungHo Lee and Seong Hyuk Lee, Numerical study of the boiling heat transfer characteristics of bluff body in cylindrical tube, Case Studies in Thermal Engineering, Vol. 31, pp. 101900 (IJ127, IF: 6.4)
  6. Joo Hyun Moon, So Yeong Lee, JungHo Lee, and Seong Hyuk Lee, Numerical study on subcooled water jet impingement cooling on superheated surfaces, Case Studies in Thermal Engineering, Vol. 31, pp. 101883 (IJ126, IF: 6.4)
  7. Hong Seok Kim and Seong Hyuk Lee, Numerical analysis of heat transfer area effect on cooling performance in regenerator of free-piston Stirling cooler, Case Studies in Thermal Engineering, Vol. 32, pp. 101875 (IJ125, IF: 6.4)
  8. Kyeong Ho Jang, Hyung Ju Lee, and Seong Hyuk Lee, Evaluation of surface temperature uniformity of multi-zone ceramic heaters with embedded cooling channels for electrostatic chuck, Journal of Mechanical Science and Technology, Vol. 36, pp. 1599-1606. (IJ124, IF: 1.5)

2021

  1. Chan Ho Jeong, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Review of the binary mixture droplet evaporation studies, Journal of Mechanical Science and Technology, Vol. 35, pp. 5259-5272. (IJ123, IF: 1.5)
  2. Hyung Ju Lee and Seong Hyuk Lee, Numerical evaluation on surface temperature uniformity of multi-zone and single-zone heaters with electrostatic chuck, Journal of Mechanical Science and Technology, Vol. 35, pp. 3763-3770. (IJ122, IF: 1.5)
  3. Chan Ho Jeong, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Selective evaporation rate modeling of volatile binary mixture droplets, International Journal of Heat and Mass Transfer, Vol. 178, pp. 121584. (IJ121, IF: 5.0)
  4. Joo Hyun Moon, Chang Kyoung Choi, and Seong Hyuk Lee, Local mass flux and pinning behavior of an evaporating droplet on heated aluminum surfaces, Case Studies in Thermal Engineering, Vol. 26, pp. 101171. (IJ120, IF: 6.4)
  5. Chan Ho Jeong, Kwan Gu Kang, Hyung Ju Lee, Ui Joon Park, Hong Seok Kim, Jin-Yeong Park, and Seong Hyuk Lee, Numerical investigation on the evolution of thin liquid layer and dynamic behavior of an electro-thermal drilling probe during close-contact heat transfer, Applied Sciences, Vol. 11, pp. 3443. (IJ119, IF: 2.5)
  6. Hyung Ju Lee, Chan Ho Jeong, Dae Yun Kim, Chang Kyoung Choi, and Seong Hyuk Lee, Solid-liquid interface temperature measurement of evaporating droplet using thermoresponsive polymer aqueous solution, Applied sciences, Vol. 11, pp. 3379. (IJ118, IF: 2.7)
  7. Joo Hyun Moon, Sang Min Lee, Chang Kyoung Choi, and Seong Hyuk Lee*, Dynamic characteristics of droplet impingement on microscale hole-patterned surfaces with anodization, International Communications in Heat and Mass Transfer, Vol. 124, pp.105260. (IJ117, IF: 6.4)
  8. Ui-Joon Park, Kwangu Kang, Hyung Ju Lee, Chan Ho Jeong, Jin-Yeong Park, and Seong Hyuk Lee, Numerical analysis of the close-contact heat transfer of the electro-thermal drilling probes for glacier-ice exploration, Journal of Mechanical Science and Technology, Vol. 35, pp. 1309–1317. (IJ116, IF: 1.5)
  9. Chan Ho Jeong, Hyung Ju Lee, Dae Yun Kim, Shahab Bayani-Ahangar, Chang Kyoung Choi, and Seong Hyuk Lee, Quantitative analysis of contact line behavior of evaporating binary mixture droplet using surface plasmon resonance imaging, International Journal of Heat and Mass Transfer, Vol. 165, pp. 120690. (IJ115, IF: 5.0)

2020

  1. Shahab Bayani-Ahangar, Fei Long, Jeffery S. Allen, Chan Ho Jeong, Seong Hyuk Lee, and Chang Kyoung Choi, The effect of absorbed volatile organic compounds on the surface plasmon resonance measurement of ultrathin film in dropwise condensation, Applied Sciences, Vol. 10, No. 17, pp. 5981. (IJ114, IF: 2.5)
  2. Dae Yun Kim, Chan Ho Jeong, Hyung Ju Lee, Chang Kyoung Choi, and Seong Hyuk Lee, Modeling of the finite boundary limit of evaporation flux in the contact line region using the surface plasmon resonance imaging, International Communications in Heat and Mass Transfer, Vol. 116, pp. 104598. (IJ113, IF: 6.4)
  3. Chan-Ho Jeong, Min Kyu Ko, Moonjin Lee, and Seong Hyuk Lee, CFD-based metamodeling of propagation distribution of styrene spilled from ship, Applied Sciences, Vol. 10, No. 6, pp.2109. (IJ112, IF: 2.5)
  4. Hyung Ju Lee and Seong Hyuk Lee, Effect of secondary vortex flow near contact point on thermal performance in the plate heat exchanger with different corrugation profiles, Energies, Vol. 12, No. 6, pp.1328. (IJ111, IF: 3.0)
  5. Shahab Bayani Ahangar, Jeffrey S. Allen, and Seong Hyuk Lee, and Chang Kyoung Choi, Surface plasmon resonance imaging: A technique to reveal the dropwise condensation mechanism, Journal of Heat Transfer-transactions of the ASME, Vol. 142, No.3, pp. 030903. (IJ110, IF: 1.855)
  6. Shahab Bayani Ahangar, Vinaykumar Konduru, Jeffrey S.Allen, Nenad miljkovic, Seong Hyuk Lee and Chang Kyuong Choi, Development of automated angle-scanning, high-speed surface plasmon resonance imaging and SPRi visualization for the study of dropwise condensation, Experiments in Fluids, Vol. 4. No.12, pp. 61. (IJ109, IF: 2.3)

2019

  1. Min Kyu Ko, Chan Ho Jeong, Moon jin Lee and Seong Hyuk Lee, Development of a metamodel for predicting near-field propagation oh hazardous and noxious substances spilled from a ship, Applied Sciences, Vol. 9, pp. 3838 (IJ108, IF: 2.5)
  2. Dae Yun Kim, Chan Ho Jeong, Beom Jin Park, Min Suk Ki, Myung-Soo Shin, and Seong Hyuk Lee, Numerical study on gaseous CO2 leakage and thermal characteristics of containers in a transport ship, Applied Sciences, Vol. 9, pp. 2536. (IJ107, IF: 2.5)
  3. Hongyi Kenneth Tan, Jong Dae Baek, Chen-Nan Sun, Jun Wei, Seong Hyuk Lee, Pei-Chen Su, Effect of laser-derived surface re-melting of YSZ electrolyte on performance of solid oxide fuel cells, International Journal of Precision Engineering and Manufacturing(Green Technology), Vol. 6, pp. 225-239. (IJ106, IF: 2.6)
  4. Hyung Ju Lee, Jaiyoung Ryu, and Seong Hyuk Lee, Influence of perforated fin on flow characteristics and thermal performance in spiral finned-tube heat exchanger, Energies, Vol. 12, No. 3, pp. 556. (IJ105, IF: 3.0)
  5. Dong Hwan Shin, Dae Yun Kim, Chang Kyoung Choi, Seong Hyuk Lee, Quantitative measurements of nanoparticle layer thicknesses near the contact line region after droplet drying-out, Journal of Mechanical Science and Technology, Vol. 33, No. 2, pp. 1-5. (IJ104, IF: 1.5)
  6. Joo Hyun Moon, Minhaeng Cho, Seong Hyuk Lee, Dynamic contact angle and liquid displacement of a droplet impinging on heated textured surfaces, Experimental Thermal and Fluid Science, Vol. 101, pp. 128-135. (IJ103, IF: 2.8)

2018

  1. Shahab Bayani, Yutaka Tabe, Yong Tae Kang, Seong Hyuk Lee, Chang Kyoung Choi, Surface plasmon resonance imaging of drop coalescence at high-temporal resolution, Journal of Flow Visualization and Image Processing, Vol. 25, No.3~4, pp.191-205. (IJ102, IF=0.8)
  2. Chan Ho Jeong, Min Kyu Ko, Moonjin Lee, Seong Hyuk Lee, Numerical simulation on propagation characteristics of hazardous noxious substance spilled from the transport ship, Applied Sciences, Vol. 8, pp. 2409-2420. (IJ101, IF=2.5)
  3. Joo Hyun Moon, Sang Min Lee, Chang Kyoung Choi, Seong Hyuk Lee, Modeling of the evaporation rate of liquid droplets on anodized heated surfaces, International Communications in Heat and Mass Transfer, Vol. 98, pp.209-215. (IJ100, IF=6.4)
  4. Joo Hyun Moon, Chang Kyoung Choi, Jeffrey S. Allen, Seong Hyuk Lee, Observation of a mixed regime for an impinging droplet on a sessile droplet, International Journal of Heat and Mass Transfer, Vol. 127, pp. 130-135. (IJ99, IF=5.0)
  5. Chan Ho Jeong, Dong Hwan shin, Vinaykumar Konduru, Jeffrey S. Allen, Chang Kyoung Choi and Seong Hyuk Lee, Quantitative measurements of nanoscale thin frost layers using surface plasmon resonance imaging, International Journal of Heat and Mass Transfer, Vol.124, pp. 83-89. (IJ98, IF=5.0)
  6. Joo Hyun Moon, Soyeong Lee, Jee Min Park, Jungho Lee, Daejoong Kim, Seong Hyuk Lee, Numerical study on flow and heat transfer characteristics of air-jet cooling system, Journal of Mechanical Science and Technology, Vol. 32, pp.6021-6027. (IJ97, IF=1.5)
  7. Jeongmin Lee, Hyung Ju Lee, Jaiyoung Ryu and Seong Hyuk Lee, Three-dimensional turbulent flow and heat transfer characteristics of longitudinal vortices embedded in turbulent boundary layer in bent channels, International Journal of Heat and Mass Transfer, Vol.117, pp. 958-965. (IJ96, IF=5.0)
  8. Chan Ho Jeong and Seong Hyuk Lee, Condensation frosting characteristics of SAM coated nanostructured superhydrophic surface, International Journal of Air-conditioning and Refrigeration, Vol. 26, pp. 1850008. (IJ95, IF=0.8)
  9. Jee Min Park, Dae Yun Kim, Jong Dae Baek, Yong-Jin Yoon, Pei-Chen Su, Seong Hyuk Lee, Effect of electrolyte thickness on electrochemical reactions and thermo-fluidic chracteristics inside s SOFC unit cell, Energies, Vol.11, No.3. (IJ94, IF=3.0)
  10. Jung Hee Lee, Joo Hyun Moon, Pei-Chen Su, and Seong Hyuk Lee, Numerical anlysis of injected current effects on thermal characteristics of vertical-cavity surface-emitting layer, Journal of Mechanical Science and Technology, Vol. 32, pp. 1463-1469. (IJ93, IF=1.5)
  11. Jee Min Park, Dae Yun Kim, Jong Dae Baek, Yong Jin Yoon, Pei-Chen su, and Seong Hyuk Lee, Numerical study on eletrochemical performance of low temperature micro-solid oxide fuel cells with submicron platinum electrodes, Energies, Vol. 11, pp. 1204. (IJ92, IF=3.0)
  12. Tae Hun Kim, Dae Yun Kim, Junseo Yun, Banseok Kim, Seong Hyuk Lee, Dongseob Kim, and Sangmin Lee, Direct-current triboelectric nanogenerator via water electrification and phase control, Nano Energy, Vol. 52, pp.95-104. (IJ91, IF=16.8)
  13. Tsung-Han Lee, Jong Dae Baek, Liangdong Fan, Florencia Edith Wiria, Pei-Chen Su, Seong Hyuk Lee, SDC-infitrated microporous silver membrane with superior resistance to thermal agglomeration for cathode-supported solid oxide fuel cells, Energies, Vol. 11, pp. 2181-2187. (IJ90, IF=3.0)

2017

  1. Longnan Li, Jinwook Choi, Joowon Bang, Soyeong Lee, Seong Hyuk Lee, and Daejoong Km, Numerical investigation of LNG gas dispersion in a confined space: An engineering model, Journal of Mechanical Science and Technology, Vol. 31, pp. 4533-4540. (IJ89, IF=1.5)
  2. Kang-Yu Liu, Yong Jin Yoon, Seong Hyuk Lee, Pei-Chen Su, Sputtered nanoporous PtNi thin film cathodes with improved thermal stability for low temperature solid oxide fuel cells, Electrochimica Acta, Vol. 247, pp.558-563. (IJ88, IF=6.6)
  3. Hyung Ju Lee, Jaeyong Park, Seong Hyuk Lee, Numerical investigation for influence of fan speed and swirling gas injection on thermal-flow characteristics in nitrocarburizing furnace, Materials Transactions, Vol. 58, No. 9, pp. 1322-1328. (IJ87, IF=1.2)
  4. Wei Xuan Chan, Seong Hyuk Lee, Namkeun Kim, Choongsoo S. Shin, Young Jin Yoon, Mechanical model of an arched basilar membrane in gerbil cochlea, Hearing Research, Vol. 345, pp.1-9. (IJ86, IF=2.5)
  5. Chan Ho Jeong, Dong Hwan Shin, Vinaykumar Konduru, Jeffrey S. Allen, Chang Kyoung Choi, Seong Hyuk Lee, High speed SPR visualization of frost propagation inside a subcooled water droplet, Journal of Heat Transfer Transactions of ASME, Vol. 139, pp. 020905. (IJ85, IF=2.1)
  6. Shol Kim, Seong Hyuk Lee, and Yong Tae Kang, Characteristics of CO2 hydrate formation/dissociation in H2O-THF aqueous solution and estimation of CO2 emission reduction by district cooling application, Energy, Vol. 120, pp. 362-373. (IJ84, IF=9.0)

2016

  1. Jinsub Kim, Seongchul Jun, Jungho Lee, Seong Hyuk Lee, and Seung Mun You, Effect of wettability on pool boiling incipience in saturated water, Journal of Heat Transfer Transactions of the ASME, Vol. 138, No. 8, pp. 080910. (IJ83, IF=2.1)
  2. Sukyung Lee, Jihoon Chung, Dae Yun Kim, Jung-Yeul Jung, Seong Hyuk Lee, and Sangmin Lee, Cylindrical water triboelectric nanogenerator via controlling geometrical shape of anodized aluminum for enhanced electrostatic induction, ACS Applied Materials and Interfaces, Vol. 8, No. 38, pp. 25014-25018. (IJ82, IF=8.3)
  3. Dong Hwan Shin, Jeffry S. Allen, Seong Hyuk Lee, and Chang Kyoung Choi, Observations of internal flow inside an evaporating nanofluid sessile droplet in the presence of an entrapped air bubble, Scientific Reports, Vol. 6, pp. 32767. (IJ81, IF=3.8)
  4. Taehun Kim, Jihoon Chung, Dae Yun Kim, Joo Hyun Moon, Sukyung Lee, Minhaeng Cho, Seong Hyuk Lee, Sangmin Lee, Design and optimization of rotating triboelectric nanogenerator by water electrification and inertia, Nano Energy, Vol. 27, pp. 340-351. (IJ80, IF=16.8)
  5. Vinaykumar Konduru, Dong Hwan Shin, Jeffry S. Allen, Chang Kyoung Choi, Seong Hyuk Lee, Young Ki Choi, Sosan Cheon, Kenneth D. Kihm, High-speed surface plasmon resonance(SPR) reflectance imagng of drop coalescence during condensation and evaporation, Journal of Heat Transfer Transactions of the ASME, Vol. 138, No. 8, pp. 080903. (IJ79, IF=2.1)
  6. Kun Hyuk Sung, Joo Won Bang, Longnan Lee, Jinwook Choi, Daejoong Kim, Hong Sun Ryou, Kee Bong Yoon, and Seong Hyuk Lee, Effect of crack size on gas leakage characteristics in a confined space, Journal of Mechanical Science and Technology, Vol. 30, No. 7, pp. 3411-3419. (IJ78, IF=1.5)
  7. Joo Hyun Moon, Jin Woon Lee, Chan Ho Jeong, and Seong Hyuk Lee, Thermal comfort analysis in a passenger compartment considering the solar radiation effect, International Journal of Thermal Sciences, Vol. 107, No. 9 pp. 77-88. (IJ77, IF=4.9)
  8. Dae Yun Kim, Jae Bin Lee, Jung-Yeol Jung, and Seong Hyuk Lee, Evaporative characteristics of Al2O3 nanofluid droplet on heated surface, Journal of Heat Transfer Transactions of the ASME, Vol. 138, No. 8, pp. 080907. (IJ76, IF=2.1)
  9. Jeongmin Lee, Jun Hee Han, Joo Hyun Moon, Chan Ho Jeong, Myeongmin Kim, Ji Yoon Kim, and Seong Hyuk Lee, Characteristics of heat transfer and chemical reaction of methane-steam reforming in a porous catalytic medium, Journal of Mechanical Science and Technology, Vol. 30, No. 1, pp. 473-481. (IJ75, IF=1.5)
  10. Joo Hyun Moon, Minhaeng Cho, and Seong Hyuk Lee, Dynamic wetting and heat transfer characteristics of a liquid droplet impinging on heated textured surfaces, International Journal of Heat and Mass Transfer, Vol. 97, No. 6, pp. 308-317. (IJ74, IF=5.0)
  11. Dong Hwan Shin, Mohammad Mamun, Jose Almonte, Charles H. Margraves, Yong Tae Kang, Seong Hyuk Lee, and Chang Kyoung Choi, A non-invasive method to predict fluid viscosity and nano-particle size using total internal reflection fluorescence microscopy (TIRFM) imaging, Microfluidics and Nanofluidics, Vol. 20, No. 3, Article 45. (IJ73, IF=2.3)
  12. Chan Ho Jeong, Jae Bin Lee, Seong Hyuk Lee, Jungho Lee, Seung Mun You, and Chang Kyoung Choi, Frosting characteristics on hydrophilic and superhydrophobic copper surfaces, Journal of Heat Transfer Transactions of the ASME, Vol. 138, No. 2, pp. 020913. (IJ72, IF=2.1)

2015

  1. Dae Yun Kim, Jae Bin Lee, Chan Ho Jeong, Soon Suk Park, Jung Yeol Jeong, Hae Jin Choi, Jung Hee Lee, and Seong Hyuk Lee, Effects of curvature on the flow characteristics and particle behavior in the flame spray process, Material transactions, Vol. 56, No. 12, pp. 2070-2077. (IJ71, IF=1.377)
  2. Joo Hyun Moon, Chang Kyoung Choi, Jeffrey S. Allen, and Seong Hyuk Lee, A rebounding droplet impacting on a static droplet, Journal of Heat Transfer Transactions of the ASME, Vol. 137, No. 8, pp. 080909-1. (IJ70, IF=2.1)
  3. Jae Bin Lee, Joo Hyun Moon, Minhaeng Cho, and Seong Hyuk Lee, Characteristics of droplet growth behavior on hydrophobic micro-textured surfaces, Journal of Heat Transfer Transactions of the ASME, Vol. 137, No. 8, pp. 080906-1. (IJ69, IF=2.1)
  4. Dong Hwan Shin, Jeffrey S. Allen, Chang Kyoung Choi and Seong Hyuk Lee, Visualization of an evaporating thin layer during the evaporation of a nanofluid droplet, Langmuir, Vol. 31, No. 4, pp. 1237-1241. (IJ68, IF=3.7)
  5. Jeongmin Lee, Joo Hyun Moon, Jaeyong Park, Dae Yun Kim and Seong Hyuk Lee, Effect of spanwise pressure gradient on flow and heat transfer characteristics of longitudinal vortices embedded in a turbulent boundary layer, Journal of Mechanical Science and Technology, Vol. 29, No. 2, pp. 867-875. (IJ67, IF=1.5)

2014

  1. Jen-Yung Chang, Shuo Wang, Jeffrey S. Allen, Seong Hyuk Lee, Suk Tai Chang, Young-Ki Choi, Craig Friedrich, and Chang Kyoung Choi, A novel miniature dynamic microfluidic cell culture platform using electro-osmosis diode pumping, Biomicrofluidics, Vol. 8, 044116. (IJ66, IF=2.6)
  2. Joo Hyun Moon, Jeongmin Lee, Jooheon Kim, and Seong Hyuk Lee, Numerical study on effective thermal conductivity of radial nanowire hetero-structures with MWCNT core, Materials Transactions, Vol. 55, No. 11, pp. 1770-1776. (IJ65, IF=1.2)
  3. Hyuk Rok Gwon, Hyung Jun Lee, Jong Min Kim, Young Eui Shin, and Seong Hyuk Lee, Dynamic behavior of capillary driven encapsulation flows for different injection types in flip-chip packaging, Journal of Mechanical Science and Technology, Vol. 28, No. 1, pp. 167-173. (IJ64, IF=1.5)
  4. Dong Hwan Shin, Chang Kyoung Choi, Yong Tae Kang and Seong Hyuk Lee, Local aggregation characteristics of a nanofluid droplet during evaporation, International Journal of Heat and Mass Transfer, Vol. 72, pp. 336-344. (IJ63, IF=5.0)
  5. Jin Woon Lee, Eun Young Jang, Seong Hyuk Lee, Hong Sun Ryou, Sangyeol Choi, and Yongsuk Kim, Influence of the spectral solar radiation on the air flow and temperature distributions in passenger compartment, International Journal of Thermal Science, Vol. 75, pp. 36-44. (IJ62, IF=4.5)
  6. Hyuk Rok Gwon, Suk Tal Chang, Jung Yeul Jung, Jong Min Kim, Chang Kyoung Choi, and Seong Hyuk Lee, Development of a new contactless dielectrophoresis system for active particle manipulation by using a movable liquid electrode, Electrophoresis, Vol. 35, pp. 2014-2021. (IJ61, IF=3.0)
  7. Dong Hwan Shin, Seong Hyuk Lee, Jeffrey S. Allen, Chang Kyoung Choi, and Yong Tae Kang, Visualization in the contact line region of an evaporating nanofluid drop, Journal of Heat Transfer Transactions of the ASME, Vol. 136, pp. 080913-1. (IJ60, IF=1.855)
  8. Jae Bin Lee, Jin Woon Lee, Seong Hyuk Lee, Yong Tae Kang, and Chang Kyoung Choi, Dependency of condensation forms on wettability, Journal of Heat Transfer Transactions of the ASME, Vol. 136, pp. 080913-1. (IJ59, IF=1.855)
  9. Jae Bin Lee, Dong Hwan Shin, Yeo Hae Lee, Dae Yun Kim, and Seong Hyuk Lee, Effect of secondary air flows on thermal characteristics and particle behavior in flame spray process, Materials Transactions, Vol. 55, No. 5, pp. 850-856. (IJ58, IF=1.2)
  10. Joo Hyun Moon, Dae Yun Kim, and Seong Hyuk Lee, Spreading and receding characteristics of a non-Newtonian droplet impinging on a heated surface, Experimental Thermal and Fluid Science, Vol. 58, pp. 94-101. (IJ57, IF=2.8)

2013

  1. Lee Roy Chevres, Dong Hwan Shin, Josehp Hernandez, Chang Kyoung Choi, Jeff Allen, and Seong-Hyuk Lee, Fringe pattern visualization of contact lines during evaporation of nanofluid droplets, Journal of Heat Transfer Transactions of the ASME, Vol. 135, No. 8, 080912. (IJ56, IF=1.855)
  2. Hyungu Im, Yongseon Hwang, Joo Hyun Moon, Seong Hyuk Lee, and Jooheon Kim, The thermal conductivity of Al(OH)3 covered MWCNT/epoxy terminated dimethyl polysiloxane composite based on analytical Al(OH)3 covered MWCNT, Composites Part A: Applied Science and Manufacturing, Vol. 54, pp. 159-165. (IJ55, IF=8.1)
  3. Joo Hyun Moon, Dong Hwan Shin, and Seong Hyuk Lee, Dynamic behavior of non-Newtonian droplets impinging on dry solid surfaces, Materials Transactions, Vol. 54, No. 2, 260-265, Feb., 2013 (IJ54, IF=1.2)

2012

  1. Byung Seung Yim, Jeong Il Lee, Yuseon Heo, Jooheon Kim, Seong Hyuk Lee, Young Eui Shin, and Jong Min Kim, Reliability properties of polderable conductive adhesives with low-melting-point alloy fillers, Materials Transactions, Vol. 53, No. 12, pp. 2104~2110, December 2012. (IJ53, SCI, IF=1.2)
  2. Joo Hyun Moon, Dong Hwan Shin, Seong Hyuk Lee and Chang Kyoung Choi, Dynamics of a non-newtonian droplet impact on a micro-textured surface, Journal of Heat Transfer Transactions of the ASME, Vol. 134, 080905-1. (IJ52, SCI, IF=1.855)
  3. Jae Bin Lee, Dong Hwan Shin, Joo Hyun Moon, and Seong Hyuk Lee, Effect of flame spray distance on the adhesive characteristics of Ni-20mass%Cr layers on SCM415 substrates, Materials Transactions(JIM), Vol. 53, No. 11, pp. 2043-2048. (IJ51, SCI, IF=1.2)
  4. Byung Seung Yim, Yumi Gwon, Seung Hoon Oh, Jooheon Kim, Yong Eui Shin, Seong Hyuk Lee, and Jong Min Kim, Characteristics of solderable electrically conductive adhesives(ECAs) for electronic packaging, Microelectronics Reliability, Vol. 52, No. 6, pp. 1165-1173. (IJ50, SCI, IF=1.6)
  5. Jin Woon Lee, Seong Hyuk Lee and Jaesung Jang, Numerical analysis on the electrostatic capture of airborne nanoparticles and viruses in a homemade particle concentrator with a unipolar charger, Journal of Electrostatics, Vol. 70, No. 2, pp. 192-200. (IJ49, SCIE, IF=1.9)

2011

  1. Dong Hyun Kim, Won-Eui Hong, Jae-Sang Ro, Seong Hyuk Lee, Chang-Hoon Lee, and Seungho Park, In-situ observation of phase transformation in amorphous silicon during Joule-heating induced crystallization process, Thin Solid Films, Vol. 519, No. 16, pp. 5516-5522. (IJ48, SCI, IF=2.0)
  2. Seong Hyuk Lee, Hyung Jun Lee, Jong-Min Kim, and Young-Eui Shin, Dynamic filling characteristics of capillary driven underfill process in flip chip packaging, Materials Transactions, Vol. 52, No. 10, pp. 1998-2003. (IJ47, SCI, IF=1.2)
  3. Jae Bin Lee and Seong Hyuk Lee, Thermal boundary resistance effect on nonequilibrium energy transport in metal-dielectric thin films heated by femtosecond pulse lasers, Materials Transactions, Vol. 52, No. 7, pp. 1492-1499. (IJ46, SCI, IF=1.2)
  4. Dong Hwan Shin, Jae Bin Lee, Jae Lyoung Wi, Seungil Park, Namil Kim, Minhaeng Cho, Jong Min Kim, and Seong Hyuk Lee, Flattening characteristics of Ni20Cr thermal-sprayed coating layers on preheated SCM415 substrates, Materials Transactions, Vol. 52, No. 7, pp. 1515-1521. (IJ45, SCI, IF=1.2)
  5. Dong Hwan Shin, Tolou Shokuhfar, Chang Kyoung Choi, Seong Hyuk Lee, and Craig Friedrich, Droplet wettability change of titania nanotube surfaces due to annealing and aging, Nanotechnology, Vol. 22, No. 31, 315704. (IJ44, SCI, IF=2.9)
  6. Jae Bong Lee and Seong Hyuk Lee, Dynamic behavior of wetting and spreading of a liquid droplet impinging on hydrophobic textured surfaces, Langmuir, Vol. 27, No. 11, pp. 6565-6573. (IJ43, SCI, IF=3.7)
  7. Dong Hyun Kim, Won Eui Hong, Jae Sang Ro, Seong Hyuk Lee, and Seungho Park, Thermal deformation of glass backplanes during joule-heating induced crystallization process, Vacuum, Vol. 85, Issue 9, pp. 847-852. (IJ42, SCI, IF=3.8)
  8. Jae Bin Lee, Kwangu Kang, and Seong Hyuk Lee, Comparison of theoretical models for electron-phonon coupling in thin gold films irradiated by femtosecond pulse laser, Materials Transactions, Vol. 52, No. 3, pp. 547-553. (IJ41, SCI, IF=1.2)

2010

  1. Hyung Sub Sim, Seungho Park, Tae-Hyoung Kim, Young Ki Choi, Joon Sik Lee and Seong Hyuk Lee, Femtosecond laser pulse train effect on optical characteristics and nonequilibrium heat transfer in thin metal films, Materials Transactions, Vol. 51, No. 6, pp. 1156-1162. (IJ40, SCI, IF=1.2)
  2. Hyuk Rok Gwon and Seong Hyuk Lee, Spectral and angular response of surface plasmon resonance based on the Kretschmann prism configuration, Materials Transactions, Vol 51, No.6 pp. 1150-1155. (IJ39, SCI, IF=1.2)
  3. Dong Hwan Shin, Seong Hyuk Lee, Scott Retterer, and Chang Kyoung Choi, Evaporation characteristics of sessile droplets on nano-patterned hydrophobic surfaces, Journal of Heat Transfer Transactions of the ASME, Vol. 132, Issue 8, 080905. (IJ38, SCI, IF=1.855)
  4. Dong Hwan Shin, Seong Hyuk Lee, Chang Kyoung Choi, and Scott Retterer, The evaporation and wetting dynamics of sessile water droplets on submicron-scale patterned silicon hydrophobic surfaces, Journal of Micromechanics and Microengineering, Vol. 20, No. 5, 055021. (IJ37, SCI, IF=2.4)
  5. Jong-Min Kim, Yong Song, Minhaeng Cho, Seong Hyuk Lee, and Young-Eui Shin, Characteristics of thermosonic anisotropic conductive adhesives (ACFs) flip-chip bonding, Materials Transactions, Vol. 51, No.10, pp. 1790-1795. (IJ36, SCI, IF=1.2)
  6. Jae Bong Lee, Hyuk Rok Gwon, Seong Hyuk Lee, and Minhaeng Cho, Wetting transition characteristics on microstructured hydrophobic surfaces, Materials Transactions, Vol. 51, No. 9, pp. 1709-1711. (IJ35, SCI, IF=1.2)

2009

  1. Byung-Seong Yim, Jong-Min Kim, Sung-Ho Lee, Seong Hyuk Lee, Jooheon Kim, Jung-Geun Han, Minhaeng Cho, Hybrid interconnection process using solderable ICAs with low-melting-point alloy fillers, Materials Transations, Vol.11, pp. 2649-2655. (IJ34, SCI, IF=1.377)
  2. Byung-Seung Yim, Jong-Min Kim, Sung-Ho Jeon, Seong Hyuk Lee, Jooheon Kim, Jung-Geun Han, Yong-Sung Eom and Young-Eui Shin, Self-organized interconnection process using solderable ACA (Anisotropic Conductive Adhesive), Materials Transactions, Vol. 50, No. 7, pp. 1684-1689. (IJ33, SCI, IF=1.2)
  3. Jae Hyung Kim, Jung Hee Lee, Jong Min Kim and Seong Hyuk Lee, Numerical analysis of coalescence characteristics of low melting point alloy fillers using a non-equilibrium phase field model, Materials Transactions, Vol. 50, No. 7, pp. 1678-1683. (IJ32, SCI, IF=1.2)
  4. Dong Hwan Shin, Seong Hyuk Lee, Jung Yeul Jung, and Jung-Yul Yoo, Evaporating characteristics of sessile droplet on hydrophobic and hydrophilic surfaces, Microelectronics Engineering, Vol. 86, Issues 4-6, pp.1350-1353. (IJ31, SCI, IF=2.3)
  5. Kyoung Chun Yang, Seong Hyuk Lee, Jong-Min Kim, Young Ki Choi, Dave F. Farson, and Young Eui Shin, Characteristics of Sn-2.5 Ag flip chip solder joints under thermal shock test conditions, Journal of Mechanical Science and Technology, Vol. 23, No. 2, pp. 435-441. (IJ30, SCIE, IF=1.5)

2008

  1. Kwangu Kang, Seong Hyuk Lee and Hong Sun Ryou, Optical characteristics and nanoscale energy transport in thin film structures irradiated by nanosecond-to-femtosecond lasers, Materials Transactions, Vol. 49, No. 11, pp. 2521-2527. (IJ29, SCI, IF=1.2)
  2. Jin Woon Lee, Seong Hyuk Lee, Jong-Min Kim, Jae Hyung Kim and Jung Hee Lee, Numerical investigation on self-organized interconnection using anisotropic conductive adhesive with low melting point alloy filler, Materials Transactions, Vol. 49, No. 11, pp. 2572-2578. (IJ28, SCI, IF=1.2)
  3. Kwangu Kang, Seong Hyuk Lee, Hong Sun Ryou, Young Ki Choi, Seungho Park, and Joon Sik Lee, Wave interference effect in thin film structures under pulsed laser irradiation, Materials Transactions, Vol. 49, No. 8, pp. 1880-1888. (IJ27, SCI, IF=1.2)
  4. Jong-Min Kim, Kyoung Chun Yang, S.B. Lee, Seong Hyuk Lee, Yong-Eui Shin, K.H. Chang, Jung-Guen Han, Yong-Sung Eom, J.T. Moon, J.W. Baek, J.D. Nam, An investigation on wetting characteristics of solder particle for solderable electrically conductive adhesives (ECAs), Materials Science Forum, Vols. 580-582, pp. 217-220. (IJ26, SCIE, IF=0.399)
  5. Hyung Sub Sim, Kwan Gu Kang, Seong Hyuk Lee, Jong-Min Kim, Young-Eui Shin, A numerical study on nonequilibrium heat transfer and crater formation in thin metal films irradiated by femtosecond pulse laser, Materials Science Forum, Vols. 580-582, pp. 143-146. (IJ25, SCIE, IF=0.399)
  6. Seong Hyuk Lee, Jung Hee Lee, Jin Woon Lee, and Jong-Min Kim, Coalescence characteristics of fusible particles in solderable isotropic conductive adhesives (ICAs), Materials Science Forum, Vols. 580-582, pp. 213-216. (IJ24, SCIE, IF=0.399)
  7. Hyung Sub Sim and Seong Hyuk Lee, Numerical investigation on opto-energy phenomena in thin gold films irradiated by femtosecond pulse laser considering quantum effects, Numerical Heat Transfer, Part A: Applications, Vol. 54, Issue 3, pp. 279-292. (IJ23, SCI, IF=2.8)
  8. Hyung Sub Sim, Seong Hyuk Lee, and Kwan Gu Kang, Femtosecond pulse laser interactions with thin silicon films and crater formation considering optical phonons and wave interference, Microsystem Technologies, Vol. 14, No. 9-11, pp. 1439-1446. (IJ22, SCI, IF=0.708)

2007

  1. Hyung Sub Sim, Seong Hyuk Lee, and Joon Sik Lee, Numerical analysis of crater formation and ablation depth in thin silicon films heated by ultrashort pulse train lasers, Journal of Mechanical Science and Technology, Vol. 21, No. 11, pp. 1847-1854. (IJ21, SCIE, IF=1.5)
  2. Seong Hyuk Lee, D.H. Shin, H.J. Kim, Seungho Park, and J.S. Lee, Numerical investigation on optical and heat transfer characteristics of a rapid thermal annealing system for LCD manufacturing, International Journal of Thermal Sciences, Vol. 46, Issue 4, pp. 399-406. (IJ20, SCIE, IF=4.9)

2006

  1. Seong Hyuk Lee, Hyung Sub Sim, Junghee Lee, Jong-Min Kim, and Young-Eui Shin, Three temperature model for non-equilibrium energy transfer in semiconductor films irradiated with short pulse lasers, Materials Transactions, Vol. 47, No. 11, pp. 2835-2841. (IJ19, SCI, IF=1.2)
  2. Kwan Gu Kang, Seong Hyuk Lee, Young Ki Choi, Hong Sun Ryou, Joon Sik Lee, and Seungho Park, Fokker-Planck approach to laser-induced damage in dielectrics with subpicosecond pulses, Nanoscale and microscale thermophysical engineering, Vol. 10, Issue 3, pp. 217-232. (IJ18, SCI, IF=2.7)
  3. Young Min Oh, Seong Hyuk Lee, Seungho Park, and Joon Sik Lee, A numerical study on ultra-short pulse laser-induced damage on dielectrics using the Fokker-Planck equation, International Journal of Heat and Mass Transfer, Vol. 49, Issues 7-8, pp. 1493-1500. (IJ17, SCI, IF=5.0)

2005

  1. Seong Hyuk Lee, Kwan-Gu Kang, Sung-Chan Kim, Hong Sun Ryou, and Dong Soon Noh, Heat transfer characteristics in a cylindrical duct packed with solid spheres, International Journal of Air-Conditioning and Refrigeration, Vol. 13, No. 1, pp. 11-21. (IJ16)
  2. Seong Hyuk Lee, D.Y. Jeong, J.T. Lee, Hong Sun Ryou, and K. Hong, Investigation on spray characteristics under ultra-high injection pressure conditions, International Journal of Automotive Technology, Vol. 6, No. 2, pp. 128-131. (IJ15, SCIE, IF=1.5)
  3. Seong Hyuk Lee, Nonequilibrium heat transfer characteristics during ultrafast pulse laser heating of a silicon microstructure, Journal of Mechanical Science and Technology, Vol. 19, No. 6, pp. 1378-1389. (IJ14, SCIE, IF=1.5)
  4. Seong Hyuk Lee and Kwan-Gu Kang, Numerical analysis of electronic transport characteristics in dielectrics irradiated by ultrashort pulsed laser using the nonlocal Fokker-Planck equation, Numerical Heat Transfer, Part A: Applications, Vol. 48, Issue 1, pp. 59-76. (IJ13, SCI, IF=2.8)

2003

  1. SH Lee, JS Lee, S Park, YK Choi, Numerical analysis on heat transfer characteristics of a silicon film irradiated by pico-to-femtosecond pulse lasers, Numerical Heat Transfer Part A: Applications, Vol. 44, No. 8, pp. 833-850.(IJ12, IF=2.8)
  2. Gwon Hyun Ko, Seong Hyuk Lee, Hong Sun Ryou, Young Ki Choi, Development and assessment of a hybrid droplet collision model for two impinging sprays, Atomization and Sprays, Vol. 31, No. 2-3, pp. 251-272. (IJ11, IF=1.0)

2002

  1. Seong Hyuk Lee, Gwon Hyun Ko, Hong Sun Ryou, A numerical study on the spray-to-spray impingement system, Journal of Mechanical Science and Technology, Vol. 16. (IJ10,IF=1.5)

2001

  1. Ki Bae Hong, Seong Hyuk Lee, Hong Sun Ryou, Modelling of wall films formed by impinging diesel sprays, SAE 2001-01-3228. (IJ9)
  2. Seong Hyuk Lee, Gwon Hyun Ko, Hong Sun Ryou, Ki Bae Hong, Development and application of a new spray inpingement model considering film formation in a diesel engine, KSME International Journal, Vol. 15, No. 7, pp. 951-961. (IJ8, IF=0.333)
  3. Insub Lee, Hong Sun Ryou, Seong Hyuk Lee, Ki Bae Hong and Soo Chae, A numerical investigation on the development of an embedded streamwise vortex in a turbulent boundary layer with spanwise pressure gradient, Journal of Fluids Engineering Transactions of the ASME, Vol. 123, No. 3, pp. 551-558. (IJ7, IF=1.8)
  4. Dong Soon Noh, Sung Kook Hong, Hong Sun Ryou and Seong Hyuk Lee, An experimental and numerical study on thermal performance of a regenerator system with ceramic honeycomb, KSME International Journal, Vol. 15, No. 3, pp. 357-365. (IJ6, IF=0.333)

2000

  1. Seong Hyuk Lee, Hong Sun Ryou, Modeling of diesel spray impingement on a flat wall, Journal of Mechanical Science and Technology. Vol. 14, pp. 796-806. (IJ5, IF=1.5)
  2. Seong Hyuk Lee and Hong Sun Ryou, Comparison of spray/wall impingement models with experimental data, Journal of Propulsion and Power, Vol. 16, No. 6, pp. 939-945. (IJ4, IF=1.7)
  3. Seong Hyuk Lee and Hong Sun Ryou, Development of a new spray/wall interaction model, International Journal of Multiphase Flow, Vol. 26, No. 7, pp. 1209-1234. (IJ3, IF=3.6)
  4. Insub Lee, Hong Sun Ryou, Seong Hyuk Lee and Soo Chae, Comparison of two-equation model and Reynolds stress models with experimental data for the three-dimensional turbulent boundary layer in a 30 degree bend, KSME International Journal, Vol. 14, No. 11, pp. 93-102. (IJ2, IF=0.333)

1999

  1. Seong Hyuk Lee, Hong Sun Ryou and Young Ki Choi, Heat transfer in a three-dimensional turbulent boundary layer with longitudinal vortices, International Journal of Heat and Mass Transfer, Vol. 42, No. 8, pp. 1521-1534. (IJ1, IF=5.0)